Huntron ProTrack 20

Started by Al1234, October 01, 2023, 06:03:10 PM

Previous topic - Next topic

Al1234

Hi everyone, have a question but got to warn you it could be a stupid one  :-\ ,
Is it normal for ProTrack to start with 54 ohms in the start screen. I don't no of a way in setting the resistance to
54 ohm my self.
Horizontal line on both channels are fine.
The channels get unsable (Ovalish) in hi ohms and hi Frequency settings.


fetron

Dear Al1234!

Run the Huntron Workstation Diagnostics.
If no error is written, then run the loop calc option (in the workstation).

Have a nice day.

Al1234

Thank you for your reply.
So, then the 54 ohms that it starts with is normal?

fetron

Yes, absolute normal.

Al1234


admin

The 54ohms resistance is used with the LOW range which is a throwback to the old Tracker ranges. You can set your own start-up ranges with a ProTrack.
The most important troubleshooting tool is your eyes.