Print Page - Huntron 2000 110v to 220v and 50-60hz jumper

Title: Huntron 2000 110v to 220v and 50-60hz jumper
Post by: mashak on August 31, 2014, 08:43:40 AM

Hi!
I have a Huntron 2000 115v and I want to change it to 220v, I found the 115v - 220v internal switch but I can't find JP1 to change from 60hz to 50hz. Can you help me please?

Title: Re: Huntron 2000 110v to 220v and 50-60hz jumper
Post by: admin on September 02, 2014, 07:35:34 AM

Welcome to the Support Forum Machak.

The Tracker 2000's with a serial number of less than 18000 did not have the 50/60 Hz jumper. On older 2000's the 50/60 Hz frequency uses the line frequency so you should be good. I suspect you have a newer manual but an older Tracker.
Thanks.

Admin

Title: Re: Huntron 2000 110v to 220v and 50-60hz jumper
Post by: mashak on September 02, 2014, 09:14:24 AM

Thank you very much!

Regards,
Christos

Huntron Users Support Forum

Huntron User Support Forums => Out of Production Hardware => Topic started by: mashak on August 31, 2014, 08:43:40 AM