Recent posts

#1
I should also mention that the lens used with the camera is a 25mm C-mount with variable aperture.
#2
Technical Support Announcements / Re: Videos on the Huntron YouT...
Last post by admin - February 14, 2024, 07:06:17 AM
Quote from: jvthorsley on February 13, 2024, 04:27:44 PMThen when you stop to look at the trace in Real Time you can see it slide into the green pass trace!

In this case the Delay feature may be a better option.
#3
Technical Support Announcements / Re: Videos on the Huntron YouT...
Last post by jvthorsley - February 13, 2024, 04:27:44 PM
Hi Curtis
I like the Tech Tips about the Drain feature.
I was aware of it but not used it.
I can see a number of times when you almost are forced except charging / discharging capacitance in a circuit causing a failure.
Then when you stop to look at the trace in Real Time you can see it slide into the green pass trace!
#4
Technical Support Announcements / Re: Videos on the Huntron YouT...
Last post by admin - February 12, 2024, 11:23:54 AM
The latest videos deal with a variety of subjects. Check them out.

Setting Component tags (labels) in the Image pane -

Moving Alignment Points for Access Probers (the Realign process) -

AND Using the Drain Feature in Workstation (draining a charge on the PCB)-
#5
Out of Production Hardware / Re: Huntron Tracker 2500 Manua...
Last post by admin - January 18, 2024, 02:45:42 PM
Quote from: Ljcttech on December 28, 2023, 03:06:50 PMOkay thank you for the help.
Ljcttech, were you able to fix the problem on your Tracker 2500? If yes, can you share the solution?
Thanks!
#6
I recall seeing this Prober on EBay. It is pretty old. Can you post an image of the area on the Z head where the camera would be mounted? I want to verify the camera connection that would have been used (NTSC or USB).

If it is USB then Imaging Source still sells lists the correct camera.
https://www.theimagingsource.com/en-us/product/industrial/2u/dmk42auc03/

You will also need to purchase a Workstation license.
#7
Yes Z.
Serial 550-01021. Will the DFK 72BUC02 be good?
#8
Welcome to the Huntron Users Forum, TechnikaSystem.

Is the USB cable that would go to the camera on the Z head still in place? If it is an older Prober it may have a power cable and BNC for the camera instead. Can you supply a serial number?

The DFK camera model we use is 42AUC03 with a C mount lens.
#9
Hello. I bought a second-hand Huntron Access 2, unfortunately, it does not have the main camera. What type of DFK camera and lens should I use for it to be correct? Thank you in advance for the information.
#10
Out of Production Hardware / Re: Huntron Tracker 2500 Manua...
Last post by Ljcttech - December 28, 2023, 03:06:50 PM
Okay thank you for the help.