Print Page - Tracker 2700 damaged

Title: Tracker 2700 damaged
Post by: bcheramy on July 25, 2012, 03:33:24 AM

Hi All

My Tracker 2700 is damaged by a high voltage capacitor discharge at the input. I find some componants burn but some problems exist again after replacement. Where is possible to find the service manual or the schematics drawings?

Regards

Title: Re: Tracker 2700 damaged
Post by: Support on July 26, 2012, 07:23:57 AM

The issue is most likely in the area of Q1-Q4, F1, F2, AR7 and AR14. What are the symptoms that still exist?

Title: Re: Tracker 2700 damaged
Post by: bcheramy on July 30, 2012, 01:39:52 AM

On the 200mv and 5v voltage selection and the 100ohm selection the display is completly crazy

Bernard

Title: Re: Tracker 2700 damaged
Post by: Support on July 30, 2012, 07:44:09 AM

Also Check Q8, K6 and R147.

Title: Re: Tracker 2700 damaged
Post by: bcheramy on July 30, 2012, 08:29:19 AM

Many thanks for your help. Is the r147 resistor.

I think that the Tracker work fine.

Bernard

Huntron Users Support Forum

Huntron User Support Forums => Out of Production Hardware => Topic started by: bcheramy on July 25, 2012, 03:33:24 AM