Huntron Users Support Forum

Huntron User Support Forums => Current Hardware - Tracker 3200S, Tracker 2800/2800S and Access Probers => Topic started by: VFDTech on December 06, 2017, 07:37:41 AM

Title: Huntron 2800
Post by: VFDTech on December 06, 2017, 07:37:41 AM
Hello, one of my Huntron 2800 units starting loading defaults after unplugged for a few hours. Also the signatures will not work correctly until i perform a DIAG ALL option on the unit. After the unit is done with all tests it passes and works fine until the next morning. Any thoughts on this?
Title: Re: Huntron 2800
Post by: admin on December 06, 2017, 08:49:38 AM
Hi,
There is probably not much you can do to fix the problem. Contact Huntron directly for support as this sounds like a hardware problem. Make sure to include the serial number of your Tracker 2800.

Thanks.
Admin
Title: Re: Huntron 2800
Post by: VFDTech on December 06, 2017, 09:20:47 AM
Ok thanks, we will be sending the unit in.
Title: Re: Huntron 2800
Post by: jvthorsley on December 14, 2017, 03:35:24 PM
So has the problem been identified yet?
If its hardware sounds like a job for a ProTrack!!
Title: Re: Huntron 2800
Post by: admin on December 21, 2017, 07:25:55 AM
Turned out to be a EEPROM issue.