Update in reference

Started by ereides, May 09, 2012, 06:35:28 AM

Previous topic - Next topic

ereides

Hello Curtis

Is there some way in order to update a component in the reference with a new test result?

Thank you.
Best regards

Ernesto Reides

admin

#1
YOu can set the new scan as a Reference if I understand your question correctly. Look in the Tree/Component Scans tab to see what is set as a Reference and what is not.
This Quick Tip (#7) may help also:
http://www.huntron.com/sales-support/techsupport.htm

Curtis
The most important troubleshooting tool is your eyes.

ereides

Thank you Curtis but I want to explain better my question:

1. I have only one scan of a sequence set as reference.
2. Now I do a scan on a pin of a component with the "Get Signature" function.
3. How can I take this new signature and update only this one into the reference list of the sequence?

Thank you.
Best regards

Ernesto Reides

admin

If you have the Reference selected in the Tree pane/Component Scans and you are viewing those signatures in the Signatures pane/Troublesheet tab, then "Get Signature" followed by "Replace Signature" (provided you get the signature you want) will replace the original Reference. You can do this is the Signature pane/Signatures tab as well.
The most important troubleshooting tool is your eyes.