#91

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by admin - November 01, 2023, 10:51:08 AM

James, do you still have 3.5.4. installed? Maybe you can locate the LCSPRO file created by that version?

#92

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by jvthorsley - November 01, 2023, 10:45:21 AM

Hi
The file LCSPRO.TXT on my Workstation 4.3 Ver. is located here:-
Windows C:\users\public\public documents\huntron hardware files\LCSPRO.TXT
I guess this is the same with Workstation 3.5.4.

#93

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by admin - November 01, 2023, 09:13:05 AM

The file that is created when Loop Calc is run (for a ProTrack only) is called LCPRO.TXT. 
If you run the Loop Calc with the ProTrack and ProTrack Scanner connected (Scanner connected to the ProTrack with the RJ45 interface cable, the BNC cables between the ProTrack and Scanner and powered on) then file created is called LCSPRO.TXT.
I do not recall where these files are stored for Workstation 3.5.4 so search you PC for these files to make sure they are created.

#94

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by CyberG3N - November 01, 2023, 08:55:26 AM

I completed the Loop Calc process. I restarted Workstation. It asks me to do loop calc again.

#95

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by CyberG3N - November 01, 2023, 08:49:20 AM

I perform Loop Calc and restart the workstation. It asks me to do loop calc again

#96

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by admin - November 01, 2023, 08:36:02 AM

Using the software with the ProTrack requires the Loop Calc file to run. Perform the Loop Calc in the Workstation diagnostics. When done restart Workstation and try connecting to the ProTrack.

#97

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by CyberG3N - November 01, 2023, 07:13:22 AM

I completed the installation.
The error I see now is
Hardware error
Unable to open Loop Compensation data file
Run Loop Calc in Control-Maintenance-Protrack I Diagnostics

I follow this step but I still get the same error.

#98

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by admin - November 01, 2023, 06:09:55 AM

When you install 3.5.4 you need to do it from a simple path/directory name on the c: drive. Uninstall the software. Create a folder called "huntron" on the c: drive, unzip the downloaded file to that location then try installing.

#99

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by CyberG3N - November 01, 2023, 03:50:36 AM

I need a detailed user manual for this device.

I downloaded Workstation 3.5.4 and installed it on Windows XP operating system, but I am getting edc1000std error.

#100

Out of Production Hardware / Re: ProTrack, meter / frequenc...

Last post by Al1234 - November 01, 2023, 12:24:24 AM

Thank you, thank you.