Hi everyone, have a question but got to warn you it could be a stupid one :-\ ,
Is it normal for ProTrack to start with 54 ohms in the start screen. I don't no of a way in setting the resistance to
54 ohm my self.
Horizontal line on both channels are fine.
The channels get unsable (Ovalish) in hi ohms and hi Frequency settings.
Dear Al1234!
Run the Huntron Workstation Diagnostics.
If no error is written, then run the loop calc option (in the workstation).
Have a nice day.
Thank you for your reply.
So, then the 54 ohms that it starts with is normal?
Yes, absolute normal.
thank you
The 54ohms resistance is used with the LOW range which is a throwback to the old Tracker ranges. You can set your own start-up ranges with a ProTrack.