#71

Out of Production Hardware / Re: Huntron Protrack KJ2

Last post by admin - November 07, 2023, 07:45:12 AM

Welcome to the Huntron Users Forum, Dogansabanoglu.

As we discussed in our PMs, did you get a chance to replace the electrolytic caps? This still could be a power issue.

#72

Out of Production Hardware / Huntron Protrack KJ2

Last post by dogansabanoglu - November 07, 2023, 06:42:29 AM

Hello, I have a protrack device and one day when I turned it on it started doing strange things.  Can you help me?  Thank you.
https://drive.google.com/file/d/1T2wr7QI5toOvR1m3GtQUzVTmfJp5HsGT/view?usp=drivesdk
https://drive.google.com/file/d/1SpjBMnQFPuJjfWTil3hcHiSUiJD0ndop/view?usp=drivesdk
https://drive.google.com/file/d/1Sv0hnOnzpb0mqEttGW09ZNXucGnm_Jyt/view?usp=drivesdk

#73

Out of Production Hardware / Re: Huntron Protrack I - It r...

Last post by admin - November 06, 2023, 08:57:59 AM

Hi everyone

After the capacitors replace and a few days of use, it seems that the problem has desapeared.   

Thank you so much.

Thanks for the update.

#74

Out of Production Hardware / Re: Huntron Protrack I - It r...

Last post by ealonso - November 06, 2023, 06:27:03 AM

Hi everyone

After the capacitors replace and a few days of use, it seems that the problem has desapeared.   

Thank you so much.

#75

Obsolete Software / Re: Huntron ProTrack I + Scann...

Last post by admin - November 06, 2023, 06:21:08 AM

The Product manuals CD Part Number: 06-5217
You would need to order through your local distributor.

#76

Obsolete Software / Re: Workstation 3.5.4 sigAssis...

Last post by admin - November 06, 2023, 06:18:02 AM

SigAssist can be useful on some occasions but it is the signature analysis that is more important. It was in its infancy with version 3. The value calculations are much better in version 4.

#77

Obsolete Software / Re: Workstation 3.5.4 sigAssis...

Last post by Al1234 - November 05, 2023, 06:13:30 AM

Thank you fetron, I got some reading in that window.

#78

Out of Production Hardware / Re: Protrack I 20 over voltage...

Last post by Al1234 - November 05, 2023, 06:11:33 AM

Thank you. Yesterday these guys where throughing over voltage without being used and also during use.

I didn't know protrack can charge caps in boards to the point of causing a fault. Thanks.
I just noticed the 2nd or 3rd time I went over a 14 pin chip in circuit protrack faulted out "over voltage".

About faulting "over voltage" when not in use, Last night and today left the protracks on for an hour at a time. No fault.
If it's an external signal causing this, Maybe has something to do with the time of day. I will try it the same time in the next couple of days and report back.

#79

Out of Production Hardware / Re: Protrack I 20 over voltage...

Last post by jvthorsley - November 04, 2023, 04:58:02 PM

On a KJ2 "Over Voltage" usually comes up when an over voltage has been applied to the input.
Or even when a higher voltage range on the ProTrack has charged a Capacitor in the circuit can cause this.

#80

Out of Production Hardware / Protrack I 20 over voltage

Last post by Al1234 - November 04, 2023, 12:17:23 PM

Anyone knows why a protrack throughs error "over voltage" saying press channel A or B. But has to be turned off/on to resume operation again.
There are 2 that are doing this at random but otherwise they work fine it seems..
They are not being used when error happens. But leads are connected to the protrack. Sometimes the unit is on And is working Then I leave the desk for some reason when I come back the error is on the screen.
1 kj3 and the other kj4.