Hello. I bought a second-hand Huntron Access 2, unfortunately, it does not have the main camera. What type of DFK camera and lens should I use for it to be correct? Thank you in advance for the information.
Welcome to the Huntron Users Forum, TechnikaSystem.
Is the USB cable that would go to the camera on the Z head still in place? If it is an older Prober it may have a power cable and BNC for the camera instead. Can you supply a serial number?
The DFK camera model we use is 42AUC03 with a C mount lens.
Yes Z.
Serial 550-01021. Will the DFK 72BUC02 be good?
I recall seeing this Prober on EBay. It is pretty old. Can you post an image of the area on the Z head where the camera would be mounted? I want to verify the camera connection that would have been used (NTSC or USB).
If it is USB then Imaging Source still sells lists the correct camera.
https://www.theimagingsource.com/en-us/product/industrial/2u/dmk42auc03/ (https://www.theimagingsource.com/en-us/product/industrial/2u/dmk42auc03/)
You will also need to purchase a Workstation license.
I should also mention that the lens used with the camera is a 25mm C-mount with variable aperture.