Programmes written for Huntron Tracker 2000.

Started by jvthorsley, August 24, 2012, 05:04:21 PM

Previous topic - Next topic

jvthorsley

Programmes written for the Huntron Tracker 2000 had manual range selection. If the same programme is used on a ProTrack does the range selection then become automatic?

Support

Yes range selection in Huntron Workstation for the ProTrack is automatic.

jvthorsley

Your right it does work. Used an old program written for the DSI700 in the 90's using a version of Worstation before 2.2 and its all automatic ranges used on the ProTrack.