HTR1005B-1S Oscillator module

HTR1005B-1S Oscillator module
« on: July 27, 2011, 12:00:15 pm »
Does anyone have an idea about the specs of the 80 Hz oscillator?  I know that it outputs 80 Hz at 10 Vpp, but at what power and output impedance?  How about max distortion spec?
I can design and build a replacement, but would like to have those data before starting.

Thanks!!
David

admin

  • Huntronian
  • 409
    • HUNTRON.COM
    • Email
Re: HTR1005B-1S Oscillator module
« Reply #1 on: July 27, 2011, 03:32:11 pm »
Hi David,
Thanks for joining the Huntron Users Forum.

This is pretty old stuff so the best I could scrounge up was this old schematic and component layout for the oscillator replacement kit.



I do know the kit was offered by Huntron for a short time in the mid 1980's. There is another thread in the forum that discusses the 80Hz oscillator as well.
I hope this helps.

Curtis (Admin)
« Last Edit: March 03, 2021, 08:13:04 am by admin »
The most important troubleshooting tool is your eyes.

dbasnett

Re: HTR1005B-1S Oscillator module
« Reply #2 on: December 30, 2014, 12:59:22 am »
I'll add my voice to chorus of  HTR1005B-1S owner's whose 80 Hz module has failed, (unless one beats on the metal can with a weighty metal object).

Anyone had any success bringing these 80Hz 03243 (08-8000) modules back to life or finding a replacement. I can restore functionality by shoving a 12 V p-p 80 Hz sine wave to pin 1 of the transformer...

Thanks!




Re: HTR1005B-1S Oscillator module
« Reply #3 on: August 28, 2021, 08:02:29 pm »
Although this thread is old, I just wanted to update Huntron owners having the pre-1000 units with a can oscillator module that failed.  The circuit posted here works with current off the shelf components if you decide to build one.  I just validated the schematic...