rp388

[jvthorsley]

Hi
I did have one of these cards, and sold it with a Prober.
I'm sure you could source one through Ebay.
I could not get the Prober working properly and was not impressed with the performance of the camera. Also the boards I test are best tested by plugging in connectors, there not really suitable for a prober. If you have lots of boards of the same type to repair then makes sense to invest in a prober. I had two of the older Probers and got one camera card from a local company & the other from Huntron in France.

[David cordero]

Hello thanks for the information, I have found it very difficult to find information on this team and even thought I made a bad investment, everyone who can have a computer does not tell me what card I need to install on the PC to start walking this, I bought the Huntron CD and it was another money expense because I could not find that information and when I asked huntron for information, I just need to connect the camera or adapt a camera of an acces but they are making it difficult for me.

[David cordero]

[David cordero]

[jvthorsley]

What information do you need?

[jvthorsley]

Hello David
Looking to see if I still have any more information on this.

[jvthorsley]

The company in France shown on attached photo supplied me the upgrade camera for the Prober.

[jvthorsley]

This contact in France may be able to help with your Prober Camera.
His name: Philippe DUBECQ
And email: philippe.dubecq@dems-fr.com
Hope he can help you, he supplied me with a camera upgrade for the Pober.
James Horsley

[David cordero]

Hello friend, thanks for such valuable information, I think that with this I can solve the problem, very grateful for your information, brother, thank you very much for your help.

[jvthorsley]

Pleased to help David
If you need any other diagrams email on james.horsley@btinternet.com .

[David cordero]

thanks friend, look i found this pc is that the video card for the cam electrim edc 1000 ?.

[jvthorsley]

Hello David
Yes,  looks the same as I had.
James Horsley

[admin]

Hi David,
I have answered your question several times about the camera card.
FYI, here is what the EDC1000 looked like:



You may be able to get a different camera mounted but you will not find support in the software.
Good luck.

[David cordero]

ok now, now I know what I need, thanks curtis and apologize for not understanding before because I did not know what that card was like because I have never seen one, only now.

[jvthorsley]

Click on this link for more information about the camera:- http://adsabs.harvard.edu/full/1990IAPPP..39....1Z