Text only | Text with Images

Huntron Users Support Forum

Huntron User Support Forums => Out of Production Hardware => Topic started by: Al1234 on October 01, 2023, 06:03:10 PM

Title: Huntron ProTrack 20
Post by: Al1234 on October 01, 2023, 06:03:10 PM
Hi everyone, have a question but got to warn you it could be a stupid one  :-\ ,
Is it normal for ProTrack to start with 54 ohms in the start screen. I don't no of a way in setting the resistance to
54 ohm my self.
Horizontal line on both channels are fine.
The channels get unsable (Ovalish) in hi ohms and hi Frequency settings.

Title: Re: Huntron ProTrack 20
Post by: fetron on October 01, 2023, 11:24:59 PM
Dear Al1234!

Run the Huntron Workstation Diagnostics.
If no error is written, then run the loop calc option (in the workstation).

Have a nice day.
Title: Re: Huntron ProTrack 20
Post by: Al1234 on October 02, 2023, 12:03:14 AM
Thank you for your reply.
So, then the 54 ohms that it starts with is normal?
Title: Re: Huntron ProTrack 20
Post by: fetron on October 02, 2023, 09:44:30 PM
Yes, absolute normal.
Title: Re: Huntron ProTrack 20
Post by: Al1234 on October 04, 2023, 09:33:44 PM
thank you
Title: Re: Huntron ProTrack 20
Post by: admin on October 10, 2023, 06:30:14 AM
The 54ohms resistance is used with the LOW range which is a throwback to the old Tracker ranges. You can set your own start-up ranges with a ProTrack.
Text only | Text with Images