Recent Posts

Pages: [1] 2 3 ... 10
1
Obsolete Software / Re: Keysight Agilent GPIB interfaces
« Last post by David cordero on September 21, 2021, 06:32:01 pm »
This means that it could work because the GPIB terminals are a standard of communication and data inputs and outputs, I will try, many thanks for the information friend.
2
Obsolete Software / Re: Keysight Agilent GPIB interfaces
« Last post by fetron on September 20, 2021, 11:56:48 pm »
Dear David!

I don't have a Huntron 5100.
But I control old multimeters with Agilent gpib-usb converters.
You can download the Keysight connection expert software for free and control the device with it.
The program has an Auto discovery function, but you can also enter an address for communication in manual mode.
3
Obsolete Software / Re: Keysight Agilent GPIB interfaces
« Last post by David cordero on September 20, 2021, 04:13:06 pm »
because I have many computers with GPIB, and the Huntron 5100 works with GPIB and the GPIB to usb converter is the answer to why use GPIB and not USB ?.
 Well, this is how I convert old GPIB equipment into USB.

thanks
4
Obsolete Software / Re: Keysight Agilent GPIB interfaces
« Last post by admin on September 20, 2021, 08:08:21 am »
There is no support for GPIB interfaces with any of the current products. My question would be why use GPIB rather than USB?
Thanks.
5
Obsolete Software / Keysight Agilent GPIB interfaces
« Last post by David cordero on September 19, 2021, 09:04:27 pm »
Hello does huntron equipment support Keysight Agilent GPIB interfaces?


https://www.ebay.com/itm/192183277024?hash=item2cbf0415e0:g:xAQAAOSwRAVfMPdS             
6
Out of Production Hardware / Re: Huntron Tracker 2500 Manual
« Last post by mr.fabe on September 01, 2021, 08:29:50 pm »
Will do.  Thank you for your time and tips!
7
Out of Production Hardware / Re: Huntron Tracker 2500 Manual
« Last post by admin on September 01, 2021, 03:18:02 pm »
If you think the cause was a voltage surge to the Tracker through the probes then check the range relays and resistors as well (depending on what Tracker range was selected when it was hit).
8
Out of Production Hardware / Re: Huntron Tracker 2500 Manual
« Last post by mr.fabe on September 01, 2021, 01:38:27 pm »
I am thinking it's just a blown fuse on the input.  There is also the chance that components were affected downstream which is why I wanted the schematics.

Thank you for your help!
9
Out of Production Hardware / Re: Huntron Tracker 2500 Manual
« Last post by admin on September 01, 2021, 06:25:14 am »
Here you go...
https://huntron.com/privatesales/technical/2500schematics.pdf

What is the problem with your Tracker?
10
Out of Production Hardware / Re: Huntron Tracker 2500 Manual
« Last post by admin on August 30, 2021, 03:50:06 pm »
Unfortunately no but I will see what I can find. Stayed tuned.
Pages: [1] 2 3 ... 10