Recent posts
#11
Out of Production Hardware / Re: ProTrack Range Edit
Last post by admin - March 04, 2024, 06:22:16 AMI elaborated more on this subject recently in this post:
https://huntron.com/forum/index.php?topic=355.0
https://huntron.com/forum/index.php?topic=355.0
#12
Out of Production Hardware / Re: ProTrack I model 20
Last post by admin - March 04, 2024, 06:20:23 AMWelcome back, Paula,
Unfortunately Huntron no longer has ProTrack parts. You may be able to find a used front panel.
Thanks.
Unfortunately Huntron no longer has ProTrack parts. You may be able to find a used front panel.
Thanks.
#13
Out of Production Hardware / Re: ProTrack I model 20
Last post by Paula Silva - March 04, 2024, 03:33:43 AMHello everyone, back again almost an year after last post! Sorry for not appearing all this time...
Well, my ProTrack is working fine again, the problem was indeed the flash P28F001BX-T, since I was using the P28F001BX-B version. Thank you very much for your valuable cooperation!
One "small" question, where can I buy its front panel? Unfortunately I've burn it with my soldering iron (it slipped from its stand)...
Well, my ProTrack is working fine again, the problem was indeed the flash P28F001BX-T, since I was using the P28F001BX-B version. Thank you very much for your valuable cooperation!
One "small" question, where can I buy its front panel? Unfortunately I've burn it with my soldering iron (it slipped from its stand)...
#14
Out of Production Hardware / ProTrack Range Edit
Last post by Al1234 - March 03, 2024, 02:47:24 PMHi everyone,
I might have missed this topic somewhere else. But I was wondering how to recall or put to use the Range Edit(s). I see there are 100 that can be named and V, R & F set and stored. But just not sure can one recall them and set them in the main screen or set them up as groups and use the scan button on ....
I might have missed this topic somewhere else. But I was wondering how to recall or put to use the Range Edit(s). I see there are 100 that can be named and V, R & F set and stored. But just not sure can one recall them and set them in the main screen or set them up as groups and use the scan button on ....
#15
Out of Production Hardware / Re: ProTrack I, hi Freq, hi ...
Last post by jvthorsley - March 01, 2024, 07:19:48 AMHi Curtis
Your comment "This is some of the cool stuff the ProTrack had that was not carried over to newer products".
Reminds me you can't take the output from the internal Scanner on the 3200S to a DMM or counter.
Perhaps when the warranty period has expired someone might have a look inside the unit and see if it can be done as on the ProTrack Scanner.
Your comment "This is some of the cool stuff the ProTrack had that was not carried over to newer products".
Reminds me you can't take the output from the internal Scanner on the 3200S to a DMM or counter.
Perhaps when the warranty period has expired someone might have a look inside the unit and see if it can be done as on the ProTrack Scanner.
#16
Out of Production Hardware / Re: ProTrack I, hi Freq, hi ...
Last post by admin - February 29, 2024, 09:11:11 AMTo elaborate a bit further on this topic, you can set up your own Groups but you can also set up your own custom Ranges. Press the MENU button, then Range Edit. You have 100 spots for custom ranges. Select the Range position in the upper left, the settings on the right side and change the name on the bottom left. These custom ranges can be added to a custom Group.
This is some of the cool stuff the ProTrack had that was not carried over to newer products.
This is some of the cool stuff the ProTrack had that was not carried over to newer products.
#17
Current Hardware - Tracker 3200S, Tracker 2800/2800S and Access Probers / Re: Access 2 camera
Last post by admin - February 15, 2024, 06:33:44 AMI should also mention that the lens used with the camera is a 25mm C-mount with variable aperture.
#18
Technical Support Announcements / Re: Videos on the Huntron YouT...
Last post by admin - February 14, 2024, 07:06:17 AMQuote from: jvthorsley on February 13, 2024, 04:27:44 PMThen when you stop to look at the trace in Real Time you can see it slide into the green pass trace!
In this case the Delay feature may be a better option.
#19
Technical Support Announcements / Re: Videos on the Huntron YouT...
Last post by jvthorsley - February 13, 2024, 04:27:44 PMHi Curtis
I like the Tech Tips about the Drain feature.
I was aware of it but not used it.
I can see a number of times when you almost are forced except charging / discharging capacitance in a circuit causing a failure.
Then when you stop to look at the trace in Real Time you can see it slide into the green pass trace!
I like the Tech Tips about the Drain feature.
I was aware of it but not used it.
I can see a number of times when you almost are forced except charging / discharging capacitance in a circuit causing a failure.
Then when you stop to look at the trace in Real Time you can see it slide into the green pass trace!
#20
Technical Support Announcements / Re: Videos on the Huntron YouT...
Last post by admin - February 12, 2024, 11:23:54 AMThe latest videos deal with a variety of subjects. Check them out.
Setting Component tags (labels) in the Image pane -
Moving Alignment Points for Access Probers (the Realign process) -
AND Using the Drain Feature in Workstation (draining a charge on the PCB)-
Setting Component tags (labels) in the Image pane -
Moving Alignment Points for Access Probers (the Realign process) -
AND Using the Drain Feature in Workstation (draining a charge on the PCB)-