Hi!
I have a Huntron 2000 115v and I want to change it to 220v, I found the 115v - 220v internal switch but I can't find JP1 to change from 60hz to 50hz. Can you help me please?
Welcome to the Support Forum Machak.
The Tracker 2000's with a serial number of less than 18000 did not have the 50/60 Hz jumper. On older 2000's the 50/60 Hz frequency uses the line frequency so you should be good. I suspect you have a newer manual but an older Tracker.
Thanks.
Admin
Thank you very much!
Regards,
Christos