Richard
testeqe.mhz@gmail.com
602-524-8748
Hi
I assume your Huntron Tracker 4000 is the same as the Huntron ProTrack but without the ability to connect it to a Scanner or Computer.
If so this is probably the CRT you need, a Toshiba Part No.E8384B31.
No doubt Curtis (Huntron Tech) will correct me if I'm wrong.
For a while Huntron were selling some of these CRT's
Is this for a spare or do you have a problem with the display?
Looks like the correct one. :)
Yes the one I have has a open Filament.
I could use 2 I have a 2500 with Bad CRT also and a 2500 wih Bad HV Transformer.
Can I call you ?.
Can you sell me any of what I need ?.
Richard , 602-524-8748 cell phone.
www.radwell.co.uk
radwell part number:
huntron 06-4012
I would not expect Radwell to have any CRTs. Best to call them before ordering. Huntron no longer has any so you may need to search further. The Huntron part number for the CRT was 07-4018 by the way. The Toshiba number was 85 DB31 sometimes referred to as a P31.
The 06-4012 part number listed by fetron was for the CRT cable harness so Radwell has the wrong number.
Hi Richard
This company on link below claims they have stock of Huntron Part No. 07-4018
https://www.nsntarget.com/nsn/rfq/huntron-inc/5960012676139/07-4018/
I have two Hunton ProTracks, and a backup CRT for each of them.
But if Curtis could be persuaded to sell me a demo 3200S at reasonable price rather than insisting I go through the UK dealer, who just goes on about import charges I could be so persuaded.
I also see that EBay has the P31 on this link https://www.ebay.com/itm/Toshiba-150BWB31-CRT-Tube-RARE-/353379098595
The B31 is the CRT Phosphor.
The 150 is the size.
Sorry Richard
Your best bet might to buy one of the Ex. US Navy ProTracks on Ebay.
See this link:- https://www.ebay.co.uk/itm/234625109326?hash=item36a0bf0d4e:g:OX0AAOSwiupi0YiP.
Only $350.00.
Most of the guts removed but still has the CRT. YOU NEED.
Goodness only knows why when disposing of old no longer required Huntron ProTracks the US Navy have to remove some of the essential components.
Or go the whole hog and get yourself a working ProTrack + Scanner on EBay.
It will all work with Workstation 3.5 on Windows XP, for not too much dosh.
You could then record test results on a PC, very useful.
You can buy a cheap Huntron 1000 tracker. (ebay)
Your CRT is good for the Huntron 4000.
Only the last versions of the Tracker 1000 used the same CRT as the Tracker 4000. Look for the Trackers in grey cases.
Looking at the Tracker 2000 Operation and Maintenance Manual it lists a Toshiba CRT with the Huntron Part No. 07-4018, and manufactures Part No. 85 DB31.
This Part No. 85 DB31 also listed on Google.
Plus CRT pinout.
But the wire colours are for the Huntron Tracker 2000 !
Hello
I have this CRT
Jesus