Recent posts
#71
Out of Production Hardware / Re: Huntron Protrack KJ2
Last post by jvthorsley - November 07, 2023, 08:45:20 AMConcur with Curtis on this .
As mentioned on this Forum from my experience with a couple of KJ2's with degradation of Electrolytic Capacitors they are liable to leak electrolyte and do their worst on the copper track. As happened on my ProTrack. Especially the 47 uF Capacitors on the main board.
But would say the KJ2 is a better buy than the KJ3 because you can get it to run with the most recent version of Workstation. And if you haven't got the USB card you can get one on EBay!! But with the USB card on EBay you will need to fabricate the metal supports.
As mentioned on this Forum from my experience with a couple of KJ2's with degradation of Electrolytic Capacitors they are liable to leak electrolyte and do their worst on the copper track. As happened on my ProTrack. Especially the 47 uF Capacitors on the main board.
But would say the KJ2 is a better buy than the KJ3 because you can get it to run with the most recent version of Workstation. And if you haven't got the USB card you can get one on EBay!! But with the USB card on EBay you will need to fabricate the metal supports.
#72
Out of Production Hardware / Re: Huntron Protrack KJ2
Last post by admin - November 07, 2023, 07:45:12 AMWelcome to the Huntron Users Forum, Dogansabanoglu.
As we discussed in our PMs, did you get a chance to replace the electrolytic caps? This still could be a power issue.
As we discussed in our PMs, did you get a chance to replace the electrolytic caps? This still could be a power issue.
#73
Out of Production Hardware / Huntron Protrack KJ2
Last post by dogansabanoglu - November 07, 2023, 06:42:29 AMHello, I have a protrack device and one day when I turned it on it started doing strange things. Can you help me? Thank you.
https://drive.google.com/file/d/1T2wr7QI5toOvR1m3GtQUzVTmfJp5HsGT/view?usp=drivesdk
https://drive.google.com/file/d/1SpjBMnQFPuJjfWTil3hcHiSUiJD0ndop/view?usp=drivesdk
https://drive.google.com/file/d/1Sv0hnOnzpb0mqEttGW09ZNXucGnm_Jyt/view?usp=drivesdk
https://drive.google.com/file/d/1T2wr7QI5toOvR1m3GtQUzVTmfJp5HsGT/view?usp=drivesdk
https://drive.google.com/file/d/1SpjBMnQFPuJjfWTil3hcHiSUiJD0ndop/view?usp=drivesdk
https://drive.google.com/file/d/1Sv0hnOnzpb0mqEttGW09ZNXucGnm_Jyt/view?usp=drivesdk
#74
Out of Production Hardware / Re: Huntron Protrack I - It r...
Last post by admin - November 06, 2023, 08:57:59 AMQuote from: ealonso on November 06, 2023, 06:27:03 AMHi everyoneThanks for the update.
After the capacitors replace and a few days of use, it seems that the problem has desapeared.
Thank you so much.
#75
Out of Production Hardware / Re: Huntron Protrack I - It r...
Last post by ealonso - November 06, 2023, 06:27:03 AMHi everyone
After the capacitors replace and a few days of use, it seems that the problem has desapeared.
Thank you so much.
After the capacitors replace and a few days of use, it seems that the problem has desapeared.
Thank you so much.
#76
Obsolete Software / Re: Huntron ProTrack I + Scann...
Last post by admin - November 06, 2023, 06:21:08 AMThe Product manuals CD Part Number: 06-5217
You would need to order through your local distributor.
You would need to order through your local distributor.
#77
Obsolete Software / Re: Workstation 3.5.4 sigAssis...
Last post by admin - November 06, 2023, 06:18:02 AMSigAssist can be useful on some occasions but it is the signature analysis that is more important. It was in its infancy with version 3. The value calculations are much better in version 4.
#78
Obsolete Software / Re: Workstation 3.5.4 sigAssis...
Last post by Al1234 - November 05, 2023, 06:13:30 AMThank you fetron, I got some reading in that window.
#79
Out of Production Hardware / Re: Protrack I 20 over voltage...
Last post by Al1234 - November 05, 2023, 06:11:33 AMThank you. Yesterday these guys where throughing over voltage without being used and also during use.
I didn't know protrack can charge caps in boards to the point of causing a fault. Thanks.
I just noticed the 2nd or 3rd time I went over a 14 pin chip in circuit protrack faulted out "over voltage".
About faulting "over voltage" when not in use, Last night and today left the protracks on for an hour at a time. No fault.
If it's an external signal causing this, Maybe has something to do with the time of day. I will try it the same time in the next couple of days and report back.
I didn't know protrack can charge caps in boards to the point of causing a fault. Thanks.
I just noticed the 2nd or 3rd time I went over a 14 pin chip in circuit protrack faulted out "over voltage".
About faulting "over voltage" when not in use, Last night and today left the protracks on for an hour at a time. No fault.
If it's an external signal causing this, Maybe has something to do with the time of day. I will try it the same time in the next couple of days and report back.
#80
Out of Production Hardware / Re: Protrack I 20 over voltage...
Last post by jvthorsley - November 04, 2023, 04:58:02 PMOn a KJ2 "Over Voltage" usually comes up when an over voltage has been applied to the input.
Or even when a higher voltage range on the ProTrack has charged a Capacitor in the circuit can cause this.
Or even when a higher voltage range on the ProTrack has charged a Capacitor in the circuit can cause this.