Greetings I have a CRT and Speaker problem with a protrack. I was hoping to get some input and direction, please. on the CRT I adjust the trace horizontal location to be as center as possible in the screen. on LCD there is no "store" function. so I thought it does not need to store this, it will keep the adjustment. after adjustment, turned unit off / on. the trace was back where it was before adjustment, A Little To The Left, (about 1/8 of an inch). not that big of a deal to loose sleep over. really? :o >:( , I adjusted it again. this time I went to a screen that had "store" function in there and pressed it to let unit store its setting. then turned it off / on. >:( same thing the trace was back, A Little Over To The Lefttttt.
the speaker sounds like it's mixed with some noise. you know, kind of like when you're watching TV and there is static in the image. That's how the speaker sound like.
1/8 of an inch is starting to feel like a mile. and the speaker sounds is disturbing. ;D, any help would be greatly appreciated. thank you.
Hello!
Protrack KJ2 or KJ3 versio?
I would like a video of the faulty condition.
Hi fetron, kj3.
I figuired out how to fix the trace by interning the calibration mode. There are choices there. And thanks to your previous help I knew how to enter cal screen.
But the speaker sounds awful still.
I will see if I can record the sound with video this weekend