Text only | Text with Images

Huntron Users Support Forum

Huntron User Support Forums => Current Software - Huntron Workstation 4.X => Topic started by: jvthorsley on January 12, 2026, 06:13:32 AM

Title: Workstation 4.3 does not run DMM34410A diagnostics.
Post by: jvthorsley on January 12, 2026, 06:13:32 AM
I have a DMM34410A connected to my 3200S Tracker.
I use it as discussed on this Forum to make measurements with Workstation with my 3200S.
And works exactly as I want it to.
But if I go into Tools, Maintenance, DMM34410A Diagnostics.
I get as shown below "Diagnostics not implemented".
What is the reason for this?
You need to magnify the individual JPG's to read the text.
Title: Re: Workstation 4.3 does not run DMM34410A diagnostics.
Post by: jvthorsley on February 19, 2026, 01:12:30 AM
Please let me know if anyone else has observed this.
Title: Re: Workstation 4.3 does not run DMM34410A diagnostics.
Post by: admin on March 06, 2026, 09:48:03 AM
Hi James,

What you are seeing would be the case for anyone using this DMM.
The reason this is not implemented in Workstation is because there is no diagnostics software from Keysight to point to. This may have been added as an option in the event that Keysight created software to perform this function.

- JB
Text only | Text with Images