Huntron Support Forum

Go to Huntron web site

The Forum recently experienced a database failure with user and post information being lost.
Visit the Technical Support Announcements board for details.

Huntron 2000

Huntron 2000
« on: June 12, 2014, 06:55:11 am »
Just wondered what the difference might be between Huntron 2000, 2000A, and 2000B ....is there any difference to operator usage?
thanks
mike

admin

  • Huntronian
  • 400
    • HUNTRON.COM
    • Email
Re: Huntron 2000
« Reply #1 on: June 12, 2014, 07:09:30 am »
They are functionally all the same. The 2000B was slightly different in that the 400Hz frequency could be set internally to be 200Hz. This was a change for the US Navy who wanted the range to match the Tracker 5100DS which used a set 200Hz frequency.
The most important troubleshooting tool is your eyes.

Re: Huntron 2000
« Reply #2 on: July 10, 2014, 10:05:27 am »
Besides the Navy requirement, is there any advantage functionally between the 400hz (2000A) and 200hz (2000B)?
Is one better then the other?

James

Tracker 2000A verses 2000B question.
« Reply #3 on: July 10, 2014, 10:09:56 am »
I understand that the 2000A and 2000B are functionally the same and that the 2000A had a frequency of 400hz and the 2000B had a frequency of 200hz due to a Navy requirement.

Which is more useful the 400hz or 200hz frequencies?
Are there any issues with either when it comes to identifying circuit faults?

James

admin

  • Huntronian
  • 400
    • HUNTRON.COM
    • Email
Re: Huntron 2000
« Reply #4 on: July 10, 2014, 11:12:42 am »
No advantage unless you are looking for a specific frequency requirement.

I have merged this topic with another dealing with the same topic.
Thanks.
Admin
« Last Edit: July 10, 2014, 11:18:59 am by Admin »
The most important troubleshooting tool is your eyes.