Toggle navigation
Huntron Support Forum
Home
Help
Search
Login
Register
Go to Huntron web site
Login
Register
×
Close
Login
Remember me
Huntron Support Forum
All User Forums
Out of Production Hardware
lents mil
« previous
next »
+
Print
Pages: [
1
]
lents mil
7 Replies
5307 Views
David cordero
50
lents mil
«
on:
February 07, 2019, 12:38:40 PM »
Hi how many millimeters is the lens that the camera uses for the Huntron accses?
Logged
jvthorsley
217
Do what you do well, and if a Huntron helps use it
Re: lents mil
«
Reply #1 on:
February 09, 2019, 01:29:15 PM »
Hi David
Something last in translation here! Are you asking what the Focal Length of the lens is?
Usually this is engraved on the mount of the lens, but Curtis should have the answer to this.
As I have found previously there is always some data out there on Google.
Logged
David cordero
50
Re: lents mil
«
Reply #2 on:
February 09, 2019, 03:19:41 PM »
Hi friend
how are you
the camera has no lens and there are many measures buy a 50mm but it gives too much Zoom and it does not let me see the complete pieces if not just the legs of the ic.
Logged
jvthorsley
217
Do what you do well, and if a Huntron helps use it
Re: lents mil
«
Reply #3 on:
February 09, 2019, 04:34:57 PM »
Hi David
lower Focal length than 50 mm would give you a wider field of view. Try 25 mm. Is this what you are looking for.
You might even find an old camera with a lens you could use in a junk shop, or even EBay!
What is the internal diameter of the camera mounting the lens screws into?
«
Last Edit: February 09, 2019, 04:38:34 PM by jvthorsley
»
Logged
admin
Huntronian
421
Re: lents mil
«
Reply #4 on:
February 13, 2019, 11:14:56 AM »
Sorry I missed this post.
The Access uses a 25mm/f1.4 C-mount lens.
Cheers!
Logged
The most important troubleshooting tool is your eyes.
David cordero
50
Re: lents mil
«
Reply #5 on:
February 14, 2019, 09:49:42 PM »
ok can this be?
Logged
jvthorsley
217
Do what you do well, and if a Huntron helps use it
Re: lents mil
«
Reply #6 on:
February 16, 2019, 06:10:49 AM »
You need to be sure the mount is the correct diameter / thread size.
Logged
David cordero
50
Re: lents mil
«
Reply #7 on:
February 19, 2019, 08:28:32 PM »
if this one brings different adapters, for the models of available threads I think that this already solved everything, thank you very much for your assistance friends, I will send photos at the end of the project.
Logged
+
Print
Pages: [
1
]
« previous
next »
Huntron Support Forum
All User Forums
Out of Production Hardware
lents mil