#51

Out of Production Hardware / Re: Switchers compatible with ...

Last post by Z. Khalid - March 22, 2025, 05:07:04 PM

ProTrack and scanner will give you so much more option for diagnostic and testing. 24 Voltages from 0.200 to 20

It's very useful to have a test signal with 24 selectable discrete voltages from 200 mVp to 20 Vp. On the other hand, when switching from the tracker 2000 to a ProTruck I would miss the high voltage of the signal (since the voltage of the high impedance range of the Tracker 2000 is 60 Vp).

Sometimes a test signal with high voltage is required to check for an open circuit of a high impedance pin of an IC (in the case of no known good reference IC) or to examine the breakdown voltage of a TVS or a Zener diode.

#52

Out of Production Hardware / Re: Switchers compatible with ...

Last post by Al1234 - March 22, 2025, 12:13:47 PM

If you don't see the leads for 410 in pictures it won't have it. I hope it does for your sake, though.

ProTrack and scanner will give you so much more option for diagnostic and testing. 24 Voltages from 0.200 to 20.....and computer connectivity with free WS 3.5 software.
When you get one, make sure it's in good shape and working.

#53

Out of Production Hardware / Re: Switchers compatible with ...

Last post by Z. Khalid - March 21, 2025, 01:27:09 PM

In fact, I ordered an HSR 410 from eBay this morning, I hope that its accessories come with it.

I'm also considering upgrading from the Tracker 2000 to a newer model such as ProTrack with a scanner.

#54

Out of Production Hardware / Re: Switchers compatible with ...

Last post by Al1234 - March 21, 2025, 12:09:35 PM

You might be better off saving up for a ProTrack and a scanner....it's the best thing that happend in my lab.

#55

Out of Production Hardware / Re: Switchers compatible with ...

Last post by jvthorsley - March 20, 2025, 10:45:41 AM

Hi
Your best option would be to get a Huntron DSI 700.
Run it manually or store programmes using Windows 98.
It works semi-automatically in that you have to change the ranges manually.
A cable (Clock cable) connects the DSI 700 to the Tracker 2000.
My one is getting a bit dusty through lack of use but still works.
Also attached DSI 700 clock cable details.

#56

Out of Production Hardware / Re: Switchers compatible with ...

Last post by Al1234 - March 19, 2025, 08:06:42 PM

I've used the 410 with 2700. When using it with 2000 I think you can connect the clock and power to it.
But, having a switches, although, manual, it's very helpfull.
I have not worked with 210 to have an oppinion on that.
But, I think 410 can be used with most instrument in order to compare...volt meters,ohm meter.....
Make sure you get it with IC clips and ribbon cables.
 

#57

Out of Production Hardware / Switchers compatible with Trac...

Last post by Z. Khalid - March 19, 2025, 09:17:06 AM

Hi there!

- Which Switcher model is compatible with the Tracker 2000?

- What are the main differences between the HSR 210 and HSR 410 Switchers?

I'm going to buy a Switcher for my Tracker in question.

Thank you in advance!

#58

Out of Production Hardware / Re: ProTrack I 20B CRT Trace a...

Last post by Al1234 - March 14, 2025, 12:42:04 PM

I will see if I can record the sound with video this weekend

#59

Out of Production Hardware / Re: ProTrack I 20B CRT Trace a...

Last post by Al1234 - March 14, 2025, 12:39:06 PM

Hi fetron, kj3.
I figuired out how to fix the trace by interning the calibration mode. There are choices there. And thanks to your previous help I knew how to enter cal screen.

But the speaker sounds awful still.

#60

Out of Production Hardware / Re: ProTrack I 20B CRT Trace a...

Last post by fetron - March 13, 2025, 02:24:33 AM

Hello!

Protrack KJ2 or KJ3 versio?

I would like a video of the faulty condition.