Programmes written for Huntron Tracker 2000.

Started by jvthorsley, August 24, 2012, 05:04:21 PM

Previous topic - Next topic


Programmes written for the Huntron Tracker 2000 had manual range selection. If the same programme is used on a ProTrack does the range selection then become automatic?


Yes range selection in Huntron Workstation for the ProTrack is automatic.


Your right it does work. Used an old program written for the DSI700 in the 90's using a version of Worstation before 2.2 and its all automatic ranges used on the ProTrack.