Alternative method for Prober Offset

Started by admin, July 30, 2013, 03:20:10 PM

Previous topic - Next topic

admin

I had emailed a customer about an alternative method performing the Prober Offset that was more accurate so I figured "why not share?". Here is the basic content of the message:
---
Offset can be performed accurately using the procedure outlined in the Workstation tutorial. However, through experience we have learned the most accurate method is to essentially perform the process backward from what is described in the Tutorial. Here it is briefly:
-          Mount the PCB in the slot designated in the Sequence settings
-          Attach a small piece of vinyl tape or other soft plastic material that can be
The most important troubleshooting tool is your eyes.