Support Forum.

Started by jvthorsley, October 21, 2013, 04:50:15 PM

Previous topic - Next topic

jvthorsley

Doesn't seem to be much comment on this Forum these days.
Comment on using cameras and software, but not much comment on solving problems on circuit boards that could not be found any other way.

admin

It has been rather quiet these days. Maybe we should bring up politics or religion to get some action here.  ;)

Not much News on the Huntron front these days other than the DMM Module for Huntron Workstation.
The most important troubleshooting tool is your eyes.

jvthorsley

Hi Curtis
DMM is good, but how about an ESR meter for Caps. You almost have that with your software.

admin

The nice thing about how we implemented the DMM Module is that it uses the Workstation SDK. If there is an ESR instrument with proper drivers and (preferably) a USB connection than it could be integrated into Huntron Workstation. Basically, we are just capturing, storing and comparing a value whether it is an ASA signature, DMM measurement, o-scope waveform or ECR measurement. In fact some of the DMMs currently supported by the DMM Module can make resistance and capacitance readings.
The most important troubleshooting tool is your eyes.

jvthorsley

#4
Hi Curtis
Maybe you should include politics & religion. I subscribe to a classic car club for MG's and the website forum as well as having useful technical discussions also includes a general chat area that discusses anything from direct debits on credits cards to who might be the best in an area to service a central heating boiler.