Analog Signature Analysis in Action


Huntron Tracker Specifications

Return to Trackers page

Tracker Specification Tracker 3200S Tracker 2800 Tracker 2800S
Number of Voltages plus values 24 voltages: 200mV, 400mV, 600mV, 800mV, 1V to 20V in 1V steps including 10V (Low), 15V (Med 1), 20V (Med 2) 6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V 6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V
Number of Resitances plus values 16 resistances: 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 54Ω (Low), 1.2kΩ (Med 1), 26.7kΩ (Med 2) 9 resistances: 10Ω, 50Ω, 100Ω, 500Ω, 1kΩ, 5kΩ, 10kΩ, 50kΩ and 100kΩ 9 resistances: 10Ω, 50Ω, 100Ω, 500Ω, 1kΩ, 5kΩ, 10kΩ, 50kΩ and 100kΩ
Number of Frequencies plus values 40 frequencies: 20Hz to 190Hz in 10Hz steps; 200Hz to 1.9kHz in 100Hz steps; 2kHz to 5kHz in 1kHz steps 6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz and 2kHz 6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz and 2kHz
Range Selection Manual, Auto Scan or Controlled by Huntron Workstation Manual or use Auto Scan; Optional Software control Manual or use Auto Scan; Optional Software control
Front Panel Connections Banana jacks for A/B Test channels and Common; A and B 64 pin IDC connectors for cable based scanning (i.e. DIP clips, custom cables) Banana jacks for A/B Test channels and Common Banana jacks for A/B Test channels and Common; A and B 40 pin IDC connectors for cable based scanning (i.e. DIP clips, custom cables)
Dimensions 11.1" W x 4.4" H x 8.5" D
(28.2cm W x 11.2cm H x 22.1cm D)		 11.1" W x 4.4" H x 8.5" D
(28.2cm W x 11.2cm H x 22.1cm D)		 11.1" W x 4.4" H x 8.5" D
(28.2cm W x 11.2cm H x 22.1cm D)

Access Prober Specifications

Return to Access Probers page

Access Prober Specification Access 2 and Access RF Access DH2
Number of Test Heads 1 2
Maximum Board Under Test Size 22" x 23" (56cm x 58cm) 27" x 23" (68.6cm x 58cm)
Maximum Probing Area 18.2" x 22.4" (46.2cm x 56.9cm) 19" x 12" (48.3cm x 30.5cm)
Maximum Board Component Height 4" (10cm) 4.8" (12.2cm)
Dimensions 36" W x 15.7" H x 29" D (91.44cm W x 39.88cm H x 73.66cm D) 47” W x 61.5” H x 35.75” D (w/handle) (119.4cm W x 156.2cm H x 90.8cm D)
Accuracy and Resolution 0.0007874" (±20 microns) at 0.0003937" (10 microns) minimum 0.0003937" (±10 microns) for Top Slot (6" above plate) at 0.00002" (0.4 microns)
\