Flexible, Automated Hardware and Software Solutions


Huntron Application Notes

All application notes are in a PDF or ZIP file format. The appropriate software application (i.e. Adobe Reader) is required.

  1. Slot Dimensions Drawing for Access, Access 2 and Access DH Probers
  2. Using the Huntron Workstation Sync CAD feature
  3. Using the Board Holder Kit for Access and Access 2 Probers
  4. Using a DMM with Huntron Workstation white paper
  5. Fundamentals of Analog Signature Analysis - 19 page extract - Register to download the full 51 page version using the Huntron Contact page
  6. Troubleshooting with ASA: Real PCB Failure Analysis
  7. Cable Testing with Tracker Model 30 and Scanners
  8. Huntron Workstation Store ASCII information
  9. Huntron ASCII Format (HAF) File Format Information
  10. Huntron Workstation software: Using the Huntron Workstation version 3.x Software buttons feature
  11. General: Excerpt from the ProTrack Training manual showing good and bad signatures from actual components
  12. Huntron ProTrack: A power-off method to test Emitter-coupled logic
  13. General: Analog Signature Analysis
  14. General: Initial circuit card Inspection
  15. General: Troubleshooting without a schematic
  16. General: Signature Analysis Glossary
  17. General: The Troubleshooting Process Flowchart
  18. General: SMT Glossary
  19. General: Dealing with Signature Differences
  20. General: Independent Study on the Effects of the Huntron Tracker signal on solid state components
  21. Obsolete Product: Schematic and adjustment info for Tracker 1005B1S with serial# prefix 212 (JPEG images from manual)
  22. Obsolete Product: Information on configuring a PCI-GPIB card with a Tracker 5100DS in Windows XP
  23. Obsolete Product: Information on configuring a PCI-GPIB card with a Tracker 5100DS in Windows 2000